EcoComputeThe differential power bench← → arms · space restarts · esc off · click cyclesready · pick an arm
Differential gauge — ΔE between the arms, zero at centreFP16 engine — sixteen fuel lanesNF4 engine — four lanes, the same workloadThe chart strip — two lanes, ten samples a secondA differential power bench for the EcoCompute measurement container. One camshaft turns the same workload for either engine; the FP16 engine is fed through sixteen fuel lanes and the NF4 engine through four, so the same work moves fewer bytes per weight. Each arm is traced at ten samples a second while the chart feeds at a constant speed, the counters integrate the traces into joules, and the gauge reads the difference only between complete arms. Illustrative 7B-class run on an RTX 4090, calibrated to the measured ada / NF4 / 7.0B cell (-33.7%, n=2, data/coverage_matrix.csv): FP16 1549.5 J against NF4 1028.0 J, ΔE -33.7% — right of Ada's ~3.7B NF4 break-even, where NF4 saves energy. Left of the break-even the same comparison costs energy (the measured 1.1B cell reads +18.4%); measure your own configuration instead of assuming the sign.